News

Explanation Of Dacromet Bolt Coating Process

In addition to the common surface treatment processes of electrogalvanizing and hot-dip galvanizing for bolts , there is another surface coating process with excellent corrosion resistance, namely ...

Benefits Of Nut Galvanizing

Commonly used Grade 8 and Grade 4 nuts basically require galvanizing treatment. First, it enhances the appearance. Nuts before galvanizing are in their natural color, appearing dull and having litt...

Material Grades Of High-Strength Bolts

Bolts are classified by different strength levels, and bolts of corresponding material grades should be selected according to different design requirements, which cannot be taken lightly. There is ...

Corrosion Prevention Of Grade 12.9 High-Strength Screws

The core of all fasteners (excluding pins and retaining rings) lies in their threads. Without threads, fastening engagement cannot be achieved (except for special fasteners such as rivets). Threads...

Analysis Of Tensile Properties Of High-Strength Bolts

A small bolt plays an indispensable role. In particular, the installation and application of high-strength bolts have strict requirements for their tensile strength. When calculating the tensile lo...

Corrosion Of Stainless Steel Nuts

The quality of a 304 or 316 stainless steel nut is directly related to the operational stability of the entire equipment. Stainless steel nuts are indispensable components in equipment assembly and...

Hot-Dip Galvanized Nuts For Chemical Industry

In the fastener products we use daily, bolts generally have no burrs, while most products with burrs are nuts. This is because bolts only have their heads formed in one step, and the subsequent scr...

Steel Structure Bolt Standards

Steel structure bolt standards are distinctly different from those of ordinary bolts. What are the specific differences? Can steel structure bolts be hot-dip galvanized like ordinary bolts? We will...

Hydrogen Embrittlement Of High-Strength Bolts

What is hydrogen embrittlement? Which types of bolts are prone to hydrogen embrittlement? How to prevent hydrogen embrittlement? Below we will elaborate on the hydrogen embrittlement phenomenon of ...

Why Are Hot-Dip Galvanized Nuts Sometimes Tight And Sometimes Loose?

In daily installation and use of hot-dip galvanized nuts , we often encounter two situations: one is that the nut is difficult to screw in, and the other is that it is too loose after being screwed...

Why Do High-Strength Bolts Break?

We subconsciously think that the higher the strength of a bolt, the less likely it is to break. However, this is not the case-on the contrary, high-strength bolts break more frequently than ordinar...

Rust Resistance Of Stainless Steel Screws

Subconsciously, we all think that stainless steel screws will not rust, but this is not the case. In harsh environments, stainless steel screws can also corrode and rust, which is actually a relati...