-
20
Nov, 2024
Specification And Load-bearing Standard Of Suspension Eye Nut
The specifications and load-bearing standards of suspension eye nuts mainly involve different specifications of suspension eye nuts and their corresponding maximum load-bearing capacity. Eye nut is...
-
14
Nov, 2024
National Standards For High-strength Bolts in Different Countries
According to Chinese national standards, the standard for high-strength bolts is GB/T 3632-2018 "Bolts, Screws, Studs, and Nuts for High Strength Fasteners". This standard specifies the r...
-
12
Nov, 2024
What Are The Basic Requirements For Bolted Connections in Grid Structures?
Basic requirements for bolted connections in grid structures Bolt tightening: Tighten the bolt to the corresponding position, ensuring the stability of the bolt and ensuring that there are no visib...
-
07
Nov, 2024
Treatment Method For Contact Surface Of High-strength Bolt Friction Type Conn...
When high-strength bolts are tightened, a pre tension force is generated in the screw, while a pre pressure force is generated between the contact surfaces of the connected plates. After the connec...
-
05
Nov, 2024
How Much Do You Know About The Stress Level Of Twist Shear Bolts
High strength torsional shear bolts apply pre tension and transmit external forces through friction. Ordinary torsional shear bolt connections transmit shear force through anchor rods and hole wall...
-
31
Oct, 2024
What Precautions Should Be Taken During The Welding Process Of Welding Nuts
Welding nuts are not easy to loosen, but there are still some things to pay attention to during use in order to connect the welding nuts. Welding is the process of combining two separate parts into...
-
29
Oct, 2024
A Brief Discussion On Three Practical Methods For Connecting Stainless Steel ...
Summarize the three basic types of anti loosening methods for stainless steel threaded fasteners : a. Non removable anti loosening This is a reliable traditional anti loosening method that uses met...
-
25
Oct, 2024
Creep Failure Phenomenon Of Fasteners
What is the phenomenon of creep failure of fasteners ? 1, Creep is a failure phenomenon in which metal parts undergo deformation under long-term stress and high temperature. The deformation caused ...
-
23
Oct, 2024
High Temperature Bolt Performance Of Fasteners
High temperature bolts for fasteners include refractory and heat-resistant materials, as well as inorganic compounds and polymer materials. In order to facilitate the use of high-temperature bolts ...
-
18
Oct, 2024
Analyzing The Four Major Factors Of Dynamic Torque in Fasteners
For most users of fasteners , they may know the types of dynamic torque standards for fasteners during use, but they may not be aware of some factors that affect the dynamic torque of fasteners, wh...
-
15
Oct, 2024
What Are The Ways To Prevent Loosening Nuts?
Anti loosening nut is a common component in mechanical fasteners, which belongs to a type of fastening anti loosening nut. However, in order to avoid the nut from slipping loose during use, some an...
-
12
Oct, 2024
Tightening Method For High-strength Bolts
High strength bolts are a common fastening component, and tightening them during use is the most important part we value. Therefore, many people will ask: how to tighten high-strength bolts ? What ...