-
30
Mar, 2023
How To Choose The Correct Quenching Medium For Fasteners in Heat Treatment
Fasteners are a general-purpose component used for mechanical connection and fixation. It has the characteristics of rich varieties, complex shapes and scales, and a variety of raw materials. Faste...
-
29
Mar, 2023
Introduction To The Characteristics Of The Electroplating Layer Of Threaded F...
1. Plating thickness of threaded fasteners Regardless of whether barrel plating or rack plating is used in the electroplating process of threaded fasteners, the thickness of the coating obtained by...
-
28
Mar, 2023
Process Calculation Of U Bolt Parts
The main problem of this U-bolt part is to solve the springback problem, so after the U-bolt part is bent, the die should move left and right inward to press the part, so that the two sides of the ...
-
27
Mar, 2023
At present, almost all the bolt fastenings used in industry need to control the strength, that is, the so-called torque control torque refers to the use of predetermined torque or predetermined tor...
-
24
Mar, 2023
Analysis Of Performance Characteristics Of Stainless Steel Bolts
Stainless steel bolts refer to a general term. In this article, stainless steel bolts include most stainless steel fastener products such as inner hexagon, outer hexagon, double-head, and nut. Beca...
-
23
Mar, 2023
Fastener Manufacturers Association Of India Calls On Government To Restrict I...
The Times of India reported on March 20 that the Fasteners Manufacturers' Association of lndia (Fasteners Manufacturers' Association of lndia) was held on March 18 to commemorate the 50th anniversa...
-
22
Mar, 2023
The carbon steel bolts we commonly use, in addition to the necessary performance tests, the bolt hardness standard is also a very important parameter, so how to test the bolt hardness? First of all...
-
21
Mar, 2023
What are Flange Bolt? Flange bolt are mainly composed of hexagon head and flange plate (the gasket under the hexagon is fixed with the hexagon) and screw (cylinder with external thread), which need...
-
20
Mar, 2023
The full name of the flange nut is hexagon flange nut , the prefix and the material are enough, as long as the thread specification is specified, the order can be placed accurately. Flange nuts are...
-
17
Mar, 2023
Necessary Knowledge For Purchasing Fasteners: What Inspections Do Fastener Sc...
Fastener screws need to undergo some inspections before or after production before they can be officially put into use. Therefore, in order to obtain better results for fastener screws, these inspe...
-
16
Mar, 2023
Compared With The Outer Hexagon Screws And The Inner Hexagon Screws, Why Do M...
Today's mechanical equipment needs fasteners if they want to be able to operate normally, but I found many design drawings and found that almost all designs use hexagon socket screws , regardless o...
-
15
Mar, 2023
Why Can't The Hot-dip Galvanized Screws Be Tested With Go-no Go Gauge?
The screws we use in our daily life have national standards, and the description of a screw is M to indicate the diameter, for example, M12 screw, which means the thread diameter is 12mm. All screw...