Standard Screw Specifications And Inspection

Jan 30, 2024

Standard screws include bolts, studs, machine screws, nuts, self tapping screws, washers, cylindrical pins, rivets, and retaining rings. There are specifications for bolts such as hexagonal head bolts, half round head square neck bolts, and high-strength large hexagonal bolts.

1681111604428

There are double headed bolts and equal length double headed bolts. The specifications of machine screws are M2~M10, while the specifications of self tapping screws are M2.5~M6. Washers are divided into flat washers and spring washers. Cylindrical pins come in specifications such as cylindrical pins, tapered pins, and split pins. The specifications of rivets are 1.6~8, and the retaining ring is divided into cone pin locking retaining ring and hole elastic retaining ring.

The inspection items for standard fasteners are divided into three major parts: size, mechanical properties, and surface defects. The size inspection items have different regulations according to different products. For example, for hexagonal nuts, the specified size inspection items include thread gauge, thread stop gauge, thread minor diameter, across edge width, diagonal dimension, nut height, and perpendicularity between the nut support surface and the thread axis.

For flat washers, the specified size inspection items include inner diameter, outer diameter, thickness, coaxiality of outer circle to inner hole, flatness, etc. The mechanical performance inspection items specify hardness and tensile strength for hexagonal nuts, while only hardness is specified for flat washers. At the same time, in the inspection of surface defects, it is necessary to inspect the surface defects, oxidation, etc. of screws.

In short, the specifications, types, and inspection items of standard screws are very detailed and specific. Only by ensuring that every specification and detail meets the standards can safety and reliability be guaranteed during use.

You Might Also Like