Torx Drive Screws
Dec 25, 2025
Torx drive screws are a relatively niche type of screw. In terms of production process and material, they are no different from Phillips drive screws; the core difference lies only in the drive type (Torx drive) and the matching installation tools used. There are many relevant standards for Torx drive screws, which we will explore one by one below.
First is the Torx Drive Pan Head Screw, the most commonly used type among Torx drive screws. Everyone is quite familiar with GB/T 818 (the national standard for Phillips drive pan head screws). The Torx drive pan head screw has the same structure as the screw specified in GB/T 818, except that a Torx drive installation hole is machined on the head of the pan head. It also belongs to the small-size screw series, with M3 to M8 specifications generally available from stock. Its corresponding national standard number is GB/T 2672. Let us take a look at its technical drawings.
The specification on the left is M3×5, the one in the middle is M4×6, and the one on the far right is M5×10. These three are the most commonly used specifications of Torx drive pan head screws. Other specifications such as M6, M8, and M10 are not listed one by one due to space limitations. If you have any needs, you can contact us directly by phone, and we will provide you with a detailed explanation of relevant matters.
Another commonly used Torx drive screw is the Torx Drive Cylinder Head Screw. As the name suggests, its distinctive feature is that while the cylinder head screws we commonly use are mostly with hexagon socket drives, this screw only replaces the hexagon socket with a Torx drive hole. Let us take a look at its technical drawings; its corresponding national standard number is GB/T 2671.2.
The production standard of this screw is basically consistent with that of the well-known GB/T 70.1 (hexagon socket cylinder head screws). During production, it is only necessary to replace the hexagon punch in the mold with a Torx drive punch, which is relatively convenient.
In addition to the above two commonly used types, there are several less commonly used Torx drive screws, such as Torx drive countersunk head screws and Torx drive thin-head cylinder head screws. We will not elaborate on them here; you can simply understand them through the technical drawings.










